How do you replace a flexible hose in a bathroom sink?

How do you replace a flexible hose under a sink?

The flexible hose of the toilet sink usually consists of two specifications, the faucet connecting pipe and the toilet connecting pipe. The specifications and uses of the two hoses are also different, but the replacement methods of the two hoses are roughly the same.
Before installing the water inlet pipe of the faucet, check whether the thread of the faucet and the hose is damaged, and check whether the gasket of the hose and the O-ring connecting the faucet are intact. When installing, you need to screw the connector of the hose with M10X1 thread clockwise to the connector at the end of the faucet. Connect the nut with internal thread on the other end of the hose to the water inlet valve installed on the wall.
Special attention should be paid to the fact that each faucet has a cold and hot water inlet, the left side is the hot water connection port, and the right is the cold water connection port.

The method of installing the toilet inlet pipe is roughly the same. After checking that the threads of the toilet interface and hose are intact, use a wrench to tighten the two ends of the interface in a clockwise manner.

Get more flexible water hose from www.newstarhose.com.