Do shower hoses fit all showers?

The NEWSTAR conventional shower connector is shown in the figure below, the size is M1/2 cylindrical pipe thread, and adopts BSPT standard.

The connectors of the shower hose consists of two parts. Generally speaking, one end of the cone nut is connected to the shower or bidet, and the other end of the Hexagon nut is connected to the water inlet or faucet. The two ends of the shower hose are generally made of BSPT standard (BS EN ISO228-1), and the size is G1/2 non-threaded sealed pipe thread. This standard is almost universal in the world, but it should be noted that the thread gauge in the US market adopts the American NPT standard. The thread profile angle under this standard is 60 degrees, while the BSPT standard thread profile gauge is 55 degrees. Both There are obvious differences.

Therefore, if the product market is not in North America, all showers and shower hoses that meet the BSPT standard are universal.

In the North American market, you need to use NPT standard showers and shower hoses to match. get more standard shower set and shower hose from www.newstarhose.com.