Constant temperature showers (modern shower sets)are loved by people because they can ensure the constant water temperature and bring people a comfortable bathing experience. Points for attention when installing constant temperature showers:

1. If the tap water used has high impurity content, It is not recommended to install a thermostatic shower. The thermostatic shower is mainly heated by a thermal sensor element in the valve core of the faucet. If the water contains suspended substances and dirt, the temperature will be inaccurate and naturally cannot bring people a comfortable bathing experience. , And the service life of the shower head will be shortened, because the shower head may be blocked.

2. Before installing the thermostatic shower, it is recommended to turn on the water pipe switch, and let the water flow as far as possible to remove the sand and pebbles that are missing from the water pipe due to the decoration. This is to avoid using it after installation, and the pebbles or sand will block Constant temperature shower, this will naturally shorten its service life.

3. When installing a thermostatic shower, you must pay attention to the installation location of the hot water source. The distance between the hot water source and the shower/faucet should not be too far. The thermostatic shower itself does not produce hot water, which is based on the hot water provided by the water heater. If the water heater is too far away from the shower faucet, it will reduce the constant temperature function of the constant temperature shower, and the natural effect will not be obvious.

4. When installing a constant temperature water shower, you must also ensure that the water pressure used in the home is normal. The biggest advantage of a constant temperature shower is that it can be kept at a constant temperature when the water pressure is unstable and the water temperature is suddenly cold and hot. Even so, the water pressure should not be too high. High or too low, at least keep it between 0.05Mpa and 0.6 Mpa.

5. When installing a constant temperature shower, you must pay attention to the installation position of the hot and cold water supply pipes. Generally, the hot water pipe must be on the left and the cold water pipe must be on the right. This is an industry standard, and the other two water supply pipes will not be twisted during installation , To ensure the unblocked water supply of the water supply pipe.