How do you repair a shower head leak?

If the shower is leaking during use, we need to replace it, but before replacing it, we need to confirm the cause of the water leak.

First, you need to remove the shower. Before removing, make sure that the water inlet is closed. The method to remove the shower is very simple. Use your hand to counterclockwise connect the hose connector at the bottom of the shower and the other end of the hose to the water inlet Or remove the interface of the faucet connection, remove the water stop gasket in the nut after removal, check whether the gasket is damaged, if the gasket is damaged, you need to replace a new gasket, and then connect the hose to the flower Sprinkle the connection, open the faucet, and check if there is still water leakage. Normally, the problem of water leakage can be solved.

If the shower is still leaking, you need to replace the new shower. After installation, please use Plumbers tape to wind all the places where the nut is fixed in the same direction as the nut, otherwise it will peel off and not seal.

It should be noted that the threads of some water inlets have not been maintained for a long time and have rust spots. It is difficult to fix them with a nut during the process of replacing and fixing the shower and hose. Therefore, before reassembling, you Get some grease (waterproof, also called goose grease in the past) that plumbers use daily, and lubricate moving parts.