Daily maintenance of the toilet

In daily life, the toilet often has some malfunctions, such as: blockage, no water accumulation, water leakage, etc., then how to adjust the toilet with too much water? Let's learn together.

How to adjust the height of water in the toilet

1. When there is too much water in the toilet, if you want to adjust it, you should first open the toilet tank, and then pull out the water supply pipe at the inlet valve position from the right drain valve, and then let it naturally be placed in the water tank , So that the next time the toilet is filled with water, you can effectively avoid the phenomenon of too much water in the toilet pit.

2. In the toilet pit, water is generally allowed, but the height of the water cannot be too high. Under normal circumstances, it can only exceed the position of the toilet trap by about 1 cm. If the toilet water level exceeds the trap too much, it may be caused by the clogging of the toilet. At this time, it is necessary to take appropriate dredging methods to unblock the toilet.

3. If you want to reduce the amount of water in the toilet tank, you can put a beverage bottle full of water in the toilet tank, so that the volume of the toilet tank can be reduced, thereby effectively reducing the water consumption of the toilet tank. The purpose of saving water resources.

Second, what are the tips for buying a toilet

1. Look at the way of sewage

There are two popular toilet drainage methods on the market, one is the direct drainage type, and the other is the siphon type. Among them, the direct drainage type has a relatively strong drainage capacity and consumes less water, which can be flushed more cleanly. And the sewage discharge rate is relatively fast, but the sound of water discharge is relatively loud, and the deodorizing effect is poor. The siphon type uses more water, and the sound of the water is relatively small, and the deodorization effect is good, but the sewage pipe that needs to be arranged will be longer, so it is prone to blockage.

2. Look at the appearance of the toilet

When buying a toilet, you also need to observe the glaze condition of the toilet in detail. Under normal circumstances, high-quality toilet glaze is made by high-temperature firing, and the whole is formed at one time, so the toilet glaze will be smoother and flat, and there will be no bubbles, synapses, etc.

The above is a detailed introduction on how to reconcile the toilet with too much water and what are the techniques for purchasing a toilet. I hope it can help you with the problem of too much water in the toilet. More flexible shower hose,toilet connector hose for your bathroom.